Diyi and the Environment!
Owning a Diyi is a practical way to help reduce greenhouse gas emissions in our atmosphere. Occasionally,the sun's radiation needs a helping hand to maintain your hot  water temperature. This mainly occurs during continual cloudy days in the winte...
Jack Zhang
George
Alex
Wendy

Solar Split Pressurized System
Solar Split Pressurized System
Feedback

 

Split Pressurized System

Characteristics

  1. The split solar water heater is composed by heat collector,storage tank,controller,working station and installation parts
  2. Collector is separated from storage tank,so the tank can be put in any place of house.And the collector can be put on the inclined or flat roof
  3. Module design,arbitrary combination,harmony with the building perfectly
  4. Intelligent control and automatic operation
  5. Anti-freeze: No water in the tubes when it works,also the system controller has the anti-freezing function which the temperature circulation will operate while it reached the fixed temperature
  6. Multifunction:bathing,washing,domestic heating etc
  7. Could work at anytime and use enjoyably

Technical Parameters:

Inner tank: SUS 304-2B/2mm
Outer tank: Galvanized steel/0.5mm
Insulation: high density polyurethane foam 50mm
Vacuum tube: 58*1800mm
SS-CU-AIN/ALN coating
Colletor: aluminum alloy casting and copper pipe chanel
Bracket:Aluminum alloy 1.5mm
0-50 degree
Accessories;Circulation pump,expansion vessel,piezometer,flowmeter
Working pressure:0.7bar
Working temperature:-35-50℃
Capacity: 150L 200L 250L 300L 500L

Parameter Table-1:


Type
Area(M2) Vacuum tube Volume(L) 20GP/40GP/40HQ  Loading Qty(sets)
Φ(mm) Length(mm) Qty(pcs)
DIYI-S01-15 1.939 58 1800 15 150 29/59/70
DIYI-S01-20 2.595 58 1800 20 200 22/46/54
DIYI-S01-25 3.251 58 1800 25 250 20/40/48
DIYI-S01-30 3.907 58 1800 30 300 18/38/45

Remark:

Three models of DIYI-S01:
DIYI-S010:no coiler; DIYI-S011:single coiler; DIYI-S012:two coilers in the tank.

Split Pressurized System

Characteristics
  1. The split solar water heater is composed by heat collector,storage tank,controller,working station and installation parts
  2. Collector is separated from storage tank,so the tank can be put in any place of house.And the collector can be put on the inclined or flat roof
  3. Module design,arbitrary combination,harmony with the building perfectly
  4. Intelligent control and automatic operation
  5. Anti-freeze: No water in the tubes when it works,also the system controller has the anti-freezing function which the temperature circulation will operate while it reached the fixed temperature
  6. Multifunction:bathing,washing,domestic heating etc
  7. Could work at anytime and use enjoyably

Technical Parameters:

Inner tank: SUS 304-2B/2mm
Outer tank: Galvanized steel/0.5mm
Insulation: high density polyurethane foam 50mm
Vacuum tube: 58*1800mm
SS-CU-AIN/ALN coating
Colletor: aluminum alloy casting and copper pipe chanel
Bracket:Aluminum alloy 1.5mm
0-50 degree
Accessories;Circulation pump,expansion vessel,piezometer,flowmeter
Working pressure:0.7bar
Working temperature:-35-50℃
Capacity: 150L 200L 250L 300L 500L

Parameter Table-1:


Type
Area(M2) Vacuum tube Volume(L) 20GP/40GP/40HQ  Loading Qty(sets)
Φ(mm) Length(mm) Qty(pcs)
DIYI-S01-15 1.939 58 1800 15 150 29/59/70
DIYI-S01-20 2.595 58 1800 20 200 22/46/54
DIYI-S01-25 3.251 58 1800 25 250 20/40/48
DIYI-S01-30 3.907 58 1800 30 300 18/38/45

Remark:

Three models of DIYI-S01:
DIYI-S010:no coiler; DIYI-S011:single coiler; DIYI-S012:two coilers in the tank.

About us|Product|Sitemap|Feedback|News|Guestbook|Contact Us